Duralectra - Sanford Process

TABLE 5

Aluminum 2XXX Series Alloys:
Compositions and Properties

Wrought Aluminum

Product forms and nominal compositions of
common wrought aluminum 2XXX series alloys

AA number	Product (a)	Al	Si	Cu	Mn	Mg	Others
2001	E, ES, ET, C, DT	93.7	--	5.5	--	--	0.4Bi; 0.4Pb
2014	S, P, E, ES, ET, C, DT, FG	93.5	0.8	4.4	0.8	0.5	--
2024	S, P, E, ES, ET, C, DT	93.5	--	4.4	0.6	1.5	--
2036	S	96.7	--	2.6	0.25	0.45	--
2048	S, P	94.8	--	3.3	0.4	1.5	--
2124	P	93.5	--	4.4	0.6	1.5	--
2218	FG	92.5	--	4.0	--	1.5	2.0 Ni
2219	S, P, E, ES, ET, C, FG	93.0	--	6.3	0.3	--	0.06 Ti; 0.10V; 0.18Zr
2319	C	93.0	--	6.3	0.3	--	0.18Zn; 0.15Ti; 0.10V
2618	FG	93.7	0.18	2.3	--	1.6	1.1Fe; 1.0Ni; 0.07Ti

Note:
S = sheet;
P = plate;
F = foil;
E = extruded rod, bar & wire;
ES = extruded shapes;
ET = extruded tubes;
C = cold finished rod, bar & wires;
DT = drawn tube;
FG = forgings.

Available Through Authorized Sanford Licensees

SANFORD PROCESS™ CORPORATION
1 Shorr Court, Woonsocket, RI 02895
Tel: (401) 597-5000 Fax: (401) 597-5485
Owners of Patents of the World's Finest Hard Anodized Process

Home | Want to Know More? | Contact Us
Research Paper | Authorized Licenses

TABLE 5

Aluminum 2XXX Series Alloys: Compositions and Properties

Aluminum 2XXX Series Alloys:
Compositions and Properties